v3.0.3 - 20 Dec 2022 -------------------- - Bug fixes - Security: * Fixed LLDP underflow issue while parsing malformed Auto Attach TLVs. The original patch is available here: https://mail.openvswitch.org/pipermail/ovs-dev/2022-December/400596.html v3.0.2 - 01 Dec 2022 -------------------- - Bug fixes - QoS: * Fixed inability to apply QoS on ports with custom qdiscs. v3.0.1 - 07 Oct 2022 -------------------- - Bug fixes - DPDK: * OVS validated with DPDK 21.11.2. DPDK 21.11.2 contains fixes for the following CVEs: CVE-2022-28199 cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2022-28199 CVE-2022-2132 cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2022-2132 A bug was introduced in DPDK 21.11.1 by the commit 01e3dee29c02 ("vhost: fix unsafe vring addresses modifications"). This bug can cause a deadlock when vIOMMU is enabled and NUMA reallocation of the virtqueues happen. A fix has been posted and pushed to the DPDK 21.11 branch. It can be found here: https://patches.dpdk.org/project/dpdk/patch/20220725203206.427083-2-david.marchand@redhat.com/. If a user wishes to avoid the issue then it is recommended to use DPDK 21.11.0 until the release of DPDK 21.11.3. It should be noted that DPDK 21.11.0 does not benefit from the numerous bug and CVE fixes addressed since its release. If a user wishes to benefit from these fixes it is recommended to use DPDK 21.11.2. v3.0.0 - 15 Aug 2022 -------------------- - libopenvswitch API change: * To fix the Undefined Behavior issue causing the compiler to incorrectly optimize important parts of code, container iteration macros (e.g., LIST_FOR_EACH) have been re-implemented in a UB-safe way. * Backwards compatibility has mostly been preserved, however the user-provided pointer is now set to NULL after the loop (unless it exited via "break;") * Users of libopenvswitch will need to double-check the use of such loop macros before compiling with a new version. * Since the change is limited to the definitions within the headers, the ABI is not affected. - OVSDB: * 'relay' service model now supports transaction history, i.e. honors the 'last-txn-id' field in 'monitor_cond_since' requests from clients. * New unixctl command 'ovsdb-server/tlog-set DB:TABLE on|off". If turned on, ovsdb-server will log (at level INFO and rate limited) all operations that are committed to table TABLE in the DB database. * New Local_Config schema added to support Connections (--remote) configuration in a clustered databse independently for each server. E.g. for listening on unique addresses. See the ovsdb.local-config.5 manpage for schema details. * Returning unused memory to the OS after the database compaction is now enabled by default. Use 'ovsdb-server/memory-trim-on-compaction off' unixctl command to disable. * Most of the work for the automatic database compaction in clustered mode has been moved to a separate thread to avoid blocking the process. - OVSDB-IDL: * New monitor mode flag, OVSDB_IDL_WRITE_CHANGED_ONLY, allowing applications to relax atomicity requirements when dealing with columns whose value has been rewritten (but not changed). - OpenFlow: * Extended Flow Monitoring support for all supported OpenFlow versions: OpenFlow versions 1.0-1.2 with Nicira Extensions OpenFlow versions 1.3 with Open Network Foundation extension OpenFlow versions 1.4+, as defined in the OpenFlow specification - Python: * Added a new flow parsing library ovs.flow capable of parsing both OpenFlow and datapath flows. - IPsec: * Added support for custom per-tunnel options via 'options:ipsec_*' knobs. See Documentation/tutorials/ipsec.rst for details. - Windows: * Conntrack support for TCPv6, UDPv6, ICMPv6, FTPv6. * IPv6 Geneve tunnel support. - DPDK: * OVS validated with DPDK 21.11.1. It is recommended to use this version until further releases. * Delay creating or reusing a mempool for vhost ports until the VM is started. A failure to create a mempool will now be logged only when the VM is started. * New configuration knob 'other_config:shared-mempool-config' to set MTU that shared mempool mbuf size is based on. This allows interfaces with different MTU sizes to share mempools. - Userspace datapath: * Improved multi-thread scalability of the userspace connection tracking. * 'dpif-netdev/subtable-lookup-prio-get' appctl command renamed to 'dpif-netdev/subtable-lookup-info-get' to better reflect its purpose. The old variant is kept for backward compatibility. * Add actions auto-validator function to compare different actions implementations against default implementation. * Add command line option to switch between different actions implementations available at run time. * Add build time configure command to enable auto-validator as default actions implementation at build time. * Add AVX512 implementation of actions. - Debian packaging updated to be on par with package source in Debian/Ubuntu. * Provided an openvswitch-switch-dpdk package that integrates with the dpdk package in the distributions so that end users can opt into a DPDK-enabled Open vSwitch binary. * Provided systemd service files. * Provided openvswitch-source package for reproducible integrated build of for example OVN. * Shared library and subsequently libopenvswitch and libopenvswitch-dev binary packages are no longer built. - Linux TC offload: * Add support for offloading meters via tc police. * Add support for offloading the check_pkt_len action. - New configuration knob 'other_config:all-members-active' for balance-slb bonds. - Previously deprecated Linux kernel module is now fully removed from the OVS source tree. The version provided with the Linux kernel should be used instead. - XenServer: Support for integration with XenServer has been removed due to lack of maintenance and bitrot. v2.17.0 - 17 Feb 2022 --------------------- - Userspace datapath: * Optimized flow lookups for datapath flows with simple match criteria. See 'Simple Match Lookup' in Documentation/topics/dpdk/bridge.rst. * New per-interface configuration knob 'other_config:tx-steering'. If set to 'hash', enables hash-based Tx packet steering mode to utilize all the Tx queues of the interface regardles of the number of PMD threads. * Removed experimental tag for PMD Auto Load Balance. * New configuration knob 'other_config:n-offload-threads' to change the number of HW offloading threads. - DPDK: * EAL argument --socket-mem is no longer configured by default upon start-up. If dpdk-socket-mem and dpdk-alloc-mem are not specified, DPDK defaults will be used. * EAL argument --socket-limit no longer takes on the value of --socket-mem by default. 'other_config:dpdk-socket-limit' can be set equal to the 'other_config:dpdk-socket-mem' to preserve the legacy memory limiting behavior. * EAL argument --in-memory is applied by default if supported. * Add hardware offload support for matching IPv4/IPv6 frag types (experimental). * Add hardware offload support for GRE flows (experimental). Available only if DPDK experimental APIs enabled during the build. * Add support for DPDK 21.11. * Forbid use of DPDK multiprocess feature. * Add support for running threads on cores >= RTE_MAX_LCORE. - Python: * For SSL support, the use of the pyOpenSSL library has been replaced with the native 'ssl' module. - OVSDB: * Python library for OVSDB clients now also supports faster resynchronization with a clustered database after a brief disconnection, i.e. 'monitor_cond_since' monitoring method. * Major improvement in the performance of the OVSDB server. See the "OVSDB: Performance and Scale Journey '21" talk of OVS+OVN Conf'21. - ovs-dpctl and 'ovs-appctl dpctl/': * New commands 'cache-get-size' and 'cache-set-size' that allows to get or configure linux kernel datapath cache sizes. - ovs-ofctl dump-flows no longer prints "igmp". Instead the flag "ip,nw_proto=2" is used. - ovs-appctl: * New command tnl/neigh/aging to read/write the neigh aging time. - OpenFlow: * Default selection method for select groups with up to 256 buckets is now dp_hash. Previously this was limited to 64 buckets. This change is mainly for the benefit of OVN load balancing configurations. * Encap & Decap action support for MPLS packet type. - Ingress policing on Linux now uses 'matchall' classifier instead of 'basic', if available. - Add User Statically-Defined Tracing (USDT) probe framework support. v2.16.0 - 16 Aug 2021 --------------------- - Removed support for 1024-bit Diffie-Hellman key exchange, which is now considered unsafe. - Ingress Policing: * Rate limiting configuration now supports setting packet-per-second limits in addition to the previously configurable byte rate settings. This is not supported in the userspace datapath yet. - OVSDB: * Introduced new database service model - "relay". Targeted to scale out read-mostly access (ovn-controller) to existing databases. For more information: ovsdb(7) and Documentation/topics/ovsdb-relay.rst * New command line options --record/--replay for ovsdb-server and ovsdb-client to record and replay all the incoming transactions, monitors, etc. More datails in Documentation/topics/record-replay.rst. * The Python Idl class now has a cooperative_yield() method that can be overridden by an application that uses eventlet / gevent / asyncio with the desired yield method (e.g. {eventlet,gevent,asyncio}.sleep(0)) to prevent the application from being blocked for a long time while processing database updates. - In ovs-vsctl and vtep-ctl, the "find" command now accept new operators {in} and {not-in}. - Userspace datapath: * Auto load balancing of PMDs now partially supports cross-NUMA polling cases, e.g if all PMD threads are running on the same NUMA node. * Userspace datapath now supports up to 2^18 meters. * Added support for systems with non-contiguous NUMA nodes and core ids. * Added all-zero IP SNAT handling to conntrack. In case of collision, using ct(src=0.0.0.0), the source port will be replaced with another non-colliding port in the ephemeral range (1024, 65535). * Refactor lib/dpif-netdev.c to multiple header files. * Add avx512 implementation of dpif which can process non recirculated packets. It supports partial HWOL, EMC, SMC and DPCLS lookups. * Add commands to get and set the dpif implementations. * Add a partial HWOL PMD statistic counting hits similar to existing EMC/SMC/DPCLS stats. * Enable AVX512 optimized DPCLS to search subtables with larger miniflows. * Add more specialized DPCLS subtables to cover common rules, enhancing the lookup performance. * Enable the AVX512 DPCLS implementation to use VPOPCNT instruction if the CPU supports it. This enhances performance by using the native vpopcount instructions, instead of the emulated version of vpopcount. * Add command line option to switch between MFEX function pointers. * Add miniflow extract auto-validator function to compare different miniflow extract implementations against default implementation. * Add study function to miniflow function table which studies packet and automatically chooses the best miniflow implementation for that traffic. * Add build time configure command to enable auto-validatior as default miniflow implementation at build time. * Cache results for CPU ISA checks, reduces overhead on repeated lookups. * Add AVX512 based optimized miniflow extract function for traffic type IPv4/UDP, IPv4/TCP, Vlan/IPv4/UDP and Vlan/Ipv4/TCP. * Added new 'group' option to pmd-rxq-assign. This will assign rxq to pmds purely based on rxq and pmd load. * Add new 'pmd-rxq-isolate' option that can be set to 'false' in order that pmd cores which are pinned with rxqs using 'pmd-rxq-affinity' are available for assigning other non-pinned rxqs. - ovs-ctl: * New option '--no-record-hostname' to disable hostname configuration in ovsdb on startup. * New command 'record-hostname-if-not-set' to update hostname in ovsdb. - DPDK: * OVS validated with DPDK 20.11.1. It is recommended to use this version until further releases. * New debug appctl command 'dpdk/get-malloc-stats'. * Add hardware offload support for tunnel pop action (experimental). Available only if DPDK experimental APIs enabled during the build. * Add hardware offload support for VXLAN flows (experimental). Available only if DPDK experimental APIs enabled during the build. * EAL options --socket-mem and --socket-limit to have default values removed with 2.17 release. Logging added to alert users. - ovsdb-tool: * New option '--election-timer' to the 'create-cluster' command to set the leader election timer during cluster creation. - OVS now reports the datapath capability 'ct_zero_snat', which reflects whether the SNAT with all-zero IP address is supported. See ovs-vswitchd.conf.db(5) for details. - ovs-appctl: * Added ability to add and delete static mac entries using: 'ovs-appctl fdb/add ' 'ovs-appctl fdb/del ' - Linux datapath: * ovs-vswitchd will configure the kernel module using per-cpu dispatch mode (if available). This changes the way upcalls are delivered to user space in order to resolve a number of issues with per-vport dispatch. * New vswitchd unixctl command `dpif-netlink/dispatch-mode` will return the current dispatch mode for each datapath. v2.15.0 - 15 Feb 2021 --------------------- - OVSDB: * Changed format in which ovsdb transactions are stored in database files. Now each transaction contains diff of data instead of the whole new value of a column. New ovsdb-server process will be able to read old database format, but old processes will *fail* to read database created by the new one. For cluster and active-backup service models follow upgrade instructions in 'Upgrading from version 2.14 and earlier to 2.15 and later' section of ovsdb(7). * New unixctl command 'ovsdb-server/get-db-storage-status' to show the status of the storage that's backing a database. * New unixctl command 'ovsdb-server/memory-trim-on-compaction on|off'. If turned on, ovsdb-server will try to reclaim all the unused memory after every DB compaction back to OS. Disabled by default. * Maximum backlog on RAFT connections limited to 500 messages or 4GB. Once threshold reached, connection is dropped (and re-established). Use the 'cluster/set-backlog-threshold' command to change limits. - DPDK: * Removed support for vhost-user dequeue zero-copy. * Add support for DPDK 20.11. - Userspace datapath: * Add the 'pmd' option to "ovs-appctl dpctl/dump-flows", which restricts a flow dump to a single PMD thread if set. * New 'options:dpdk-vf-mac' field for DPDK interface of VF ports, that allows configuring the MAC address of a VF representor. * Add generic IP protocol support to conntrack. With this change, all none UDP, TCP, and ICMP traffic will be treated as general L3 traffic, i.e. using 3 tupples. * Add parameters 'pmd-auto-lb-load-threshold' and 'pmd-auto-lb-improvement-threshold' to configure PMD auto load balance behaviour. - The environment variable OVS_UNBOUND_CONF, if set, is now used as the DNS resolver's (unbound) configuration file. - Linux datapath: * Support for kernel versions up to 5.8.x. - Terminology: * The terms "master" and "slave" have been replaced by "primary" and "secondary", respectively, for OpenFlow connection roles. * The term "slave" has been replaced by "member", for bonds, LACP, and OpenFlow bundle actions. - Support for GitHub Actions based continuous integration builds has been added. - Bareudp Tunnel * Bareudp device support is present in linux kernel from version 5.7 * Kernel bareudp device is not backported to ovs tree. * Userspace datapath support is not added - ovs-dpctl and 'ovs-appctl dpctl/': * New commands '{add,mod,del}-flows' where added, which allow adding, deleting, or modifying flows based on information read from a file. - IPsec: * Add option '--no-cleanup' to allow ovs-monitor-ipsec to stop without tearing down IPsec tunnels. * Add option '--no-restart-ike-daemon' to allow ovs-monitor-ipsec to start without restarting ipsec daemon. - Building the Linux kernel module from the OVS source tree is deprecated * Support for the Linux kernel is capped at version 5.8 * Only bug fixes for the Linux OOT kernel module will be accepted. * The Linux kernel module will be fully removed from the OVS source tree in OVS branch 2.18 v2.14.0 - 17 Aug 2020 --------------------- - ovs-vswitchd no longer deletes datapath flows on exit by default. - OpenFlow: * The OpenFlow ofp_desc/serial_num may now be configured by setting the value of other-config:dp-sn in the Bridge table. * Added support to watch CONTROLLER port status in fast failover group. * New action "delete_field". - DPDK: * Deprecated DPDK pdump packet capture support removed. * Deprecated DPDK ring ports (dpdkr) are no longer supported. * Add hardware offload support for VLAN Push/Pop actions (experimental). * Add hardware offload support for matching IPv6 protocol (experimental). * Add hardware offload support for set of IPv6 src/dst/ttl and tunnel push-output actions (experimental). * OVS validated with DPDK 19.11.2, due to the inclusion of fixes for CVE-2020-10722, CVE-2020-10723, CVE-2020-10724, CVE-2020-10725 and CVE-2020-10726, this DPDK version is strongly recommended to be used. * New 'ovs-appctl dpdk/log-list' and 'ovs-appctl dpdk/log-set' commands to list and change log levels in DPDK components. * Vhost-user Dequeue zero-copy support is deprecated and will be removed in the next release. - Linux datapath: * Support for kernel versions up to 5.5.x. - AF_XDP: * New netdev class 'afxdp-nonpmd' for netdev-afxdp to save CPU cycles by enabling interrupt mode. - Userspace datapath: * Removed artificial datapath flow limit that was 65536. Now number of datapath flows is fully controlled by revalidators and the 'other_config:flow-limit' knob. * Add support for conntrack zone-based timeout policy. * New configuration knob 'other_config:lb-output-action' for bond ports that enables new datapath action 'lb_output' to avoid recirculation in balance-tcp mode. Disabled by default. * Add runtime CPU ISA detection to allow optimized ISA functions * Add support for dynamically changing DPCLS subtable lookup functions * Add ISA optimized DPCLS lookup function using AVX512 - New configuration knob 'other_config:bond-primary' for AB bonds that specifies interface will be the preferred port if it is active. - Tunnels: TC Flower offload * Tunnel Local endpoint address masked match are supported. * Tunnel Romte endpoint address masked match are supported. - GTP-U Tunnel Protocol * Add two new fields: tun_gtpu_flags, tun_gtpu_msgtype. * Only support for userspace datapath. v2.13.0 - 14 Feb 2020 --------------------- - OVN: * OVN has been removed from this repository. It now exists as a separate project. You can find it at https://github.com/ovn-org/ovn.git - Userspace datapath: * Add option to enable, disable and query TCP sequence checking in conntrack. * Add support for conntrack zone limits. * Command "ovs-appctl dpctl/dump-flows" refactored to show subtable miniflow bits for userspace datapath. - AF_XDP: * New option 'use-need-wakeup' for netdev-afxdp to control enabling of corresponding 'need_wakeup' flag in AF_XDP rings. Enabled by default if supported by libbpf. * 'xdpmode' option for netdev-afxdp renamed to 'xdp-mode'. Modes also updated. New values: native-with-zerocopy - former DRV native - new one, DRV without zero-copy generic - former SKB best-effort [default] - new one, chooses the best available from 3 above modes - DPDK: * DPDK pdump packet capture support disabled by default. New configure option '--enable-dpdk-pdump' to enable it. * DPDK pdump support is deprecated and will be removed in next releases. * DPDK ring ports (dpdkr) are deprecated and will be removed in next releases. * Add support for DPDK 19.11. * Add hardware offload support for output, drop, set of MAC, IPv4 and TCP/UDP ports actions (experimental). * Add experimental support for TSO. - RSTP: * The rstp_statistics column in Port table will only be updated every stats-update-interval configured in Open_vSwitch table. - OVSDB: * When ovsdb-server is running in backup mode, the default value of probe interval is increased to 60 seconds for the connection to the replication server. This value is configurable with the unixctl command - ovsdb-server/set-active-ovsdb-server-probe-interval. * ovsdb-server: New OVSDB extension to allow clients to specify row UUIDs. - 'ovs-appctl dpctl/dump-flows' can now show offloaded=partial for partially offloaded flows, dp:dpdk for fully offloaded by dpdk, and type filter supports new filters: "dpdk" and "partially-offloaded". - Add new argument '--offload-stats' for command 'ovs-appctl bridge/dump-flows', so it can display offloaded packets statistics. v2.12.0 - 03 Sep 2019 --------------------- - DPDK: * New option 'other_config:dpdk-socket-limit' to limit amount of hugepage memory that can be used by DPDK. * Add support for vHost Post-copy Live Migration (experimental). * OVS validated with DPDK 18.11.2 which is the new minimal supported version. * DPDK 18.11.1 and lower is no longer supported. * New option 'tx-retries-max' to set the maximum amount of vhost tx retries that can be made. - OpenFlow: * All features required by OpenFlow 1.5 are now implemented, so ovs-vswitchd now enables OpenFlow 1.5 by default (in addition to OpenFlow 1.0 to 1.4). * Removed support for OpenFlow 1.6 (draft), which ONF abandoned. * New action "check_pkt_larger". * Support for OpenFlow 1.5 "meter" action. - Userspace datapath: * ICMPv6 ND enhancements: support for match and set ND options type and reserved fields. * Add v4/v6 fragmentation support for conntrack. * New ovs-appctl "dpctl/ipf-set-enabled" and "dpctl/ipf-set-disabled" commands for userspace datapath conntrack fragmentation support. * New "ovs-appctl dpctl/ipf-set-min-frag" command for userspace datapath conntrack fragmentation support. * New "ovs-appctl dpctl/ipf-set-max-nfrags" command for userspace datapath conntrack fragmentation support. * New "ovs-appctl dpctl/ipf-get-status" command for userspace datapath conntrack fragmentation support. * New action "check_pkt_len". * Port configuration with "other-config:priority-tags" now has a mode that retains the 802.1Q header even if VLAN and priority are both zero. * 'ovs-appctl exit' now implies cleanup of non-internal ports in userspace datapath regardless of '--cleanup' option. Use '--cleanup' to remove internal ports too. * Removed experimental tag for SMC cache. * Datapath classifer code refactored to enable function pointers to select the lookup implementation at runtime. This enables specialization of specific subtables based on the miniflow attributes, enhancing the performance of the subtable search. * Add Linux AF_XDP support through a new experimental netdev type "afxdp". - OVSDB: * OVSDB clients can now resynchronize with clustered servers much more quickly after a brief disconnection, saving bandwidth and CPU time. See section 4.1.15 of ovsdb-server(7) for details of related OVSDB protocol extension. * Support to convert from cluster database to standalone database is now available when clustered is down and cannot be revived using ovsdb-tool . Check "Database Migration Commands" in ovsdb-tool man section. - OVN: * IPAM/MACAM: - select IPAM mac_prefix in a random manner if not provided by the user - add the capability to specify a static IPv4 and/or IPv6 address and get the L2 one allocated dynamically using the following syntax: ovn-nbctl lsp-set-addresses "dynamic " * Added the HA chassis group support. * Added 'external' logical port support. * Added Policy-based routing(PBR) support to create permit/deny/reroute policies on the logical router. New table(Logical_Router_Policy) added in OVN-NB schema. New "ovn-nbctl" commands to add/delete/list PBR policies. * Support for Transport Zones, a way to separate chassis into logical groups which results in tunnels only been formed between members of the same transport zone(s). * Support for IGMP Snooping and IGMP Querier. - New QoS type "linux-netem" on Linux. - Added support for TLS Server Name Indication (SNI). - Linux datapath: * Support for the kernel versions 4.19.x and 4.20.x. * Support for the kernel version 5.0.x. * Add support for conntrack zone-based timeout policy. - 'ovs-dpctl dump-flows' is no longer suitable for dumping offloaded flows. 'ovs-appctl dpctl/dump-flows' should be used instead. - Add L2 GRE tunnel over IPv6 support. v2.11.0 - 19 Feb 2019 --------------------- - OpenFlow: * OFPMP_TABLE_FEATURES_REQUEST can now modify table features. - ovs-ofctl: * "mod-table" command can now change OpenFlow table names. - ovn: * OVN-SB schema changed: duplicated IP with same Encapsulation type is not allowed any more. Please refer to Documentation/intro/install/ovn-upgrades.rst for the instructions in case there are problems encountered when upgrading from an earlier version. * New support for IPSEC encrypted tunnels between hypervisors. * ovn-ctl: allow passing user:group ids to the OVN daemons. * IPAM/MACAM: - add the capability to dynamically assign just L2 addresses - add the capability to specify a static ip address and get the L2 one allocated dynamically using the following syntax: ovn-nbctl lsp-set-addresses "dynamic " - DPDK: * Add support for DPDK 18.11 * Add support for port representors. - Userspace datapath: * Add option for simple round-robin based Rxq to PMD assignment. It can be set with pmd-rxq-assign. * Add support for Auto load balancing of PMDs (experimental) * Added new per-port configurable option to manage EMC: 'other_config:emc-enable'. - Add 'symmetric_l3' hash function. - OVS now honors 'updelay' and 'downdelay' for bonds with LACP configured. - ovs-vswitchd: * New configuration option "offload-rebalance", that enables dynamic rebalancing of offloaded flows. - The environment variable OVS_SYSLOG_METHOD, if set, is now used as the default syslog method. - The environment variable OVS_CTL_TIMEOUT, if set, is now used as the default timeout for control utilities. - The environment variable OVS_RESOLV_CONF, if set, is now used as the DNS server configuration file. - RHEL packaging: * OVN packages are split from OVS packages. A new spec file - ovn-fedora.spec.in is added to generate OVN packages. - Linux datapath: * Support for the kernel versions 4.16.x, 4.17.x, and 4.18.x. v2.10.0 - 18 Aug 2018 --------------------- - ovs-vswitchd and utilities now support DNS names in OpenFlow and OVSDB remotes. - ovs-vswitchd: * New options --l7 and --l7-len to "ofproto/trace" command. * Previous versions gave OpenFlow tables default names of the form "table#". These are not helpful names for the purpose of accepting and displaying table names, so now tables by default have no names. * The "null" interface type, deprecated since 2013, has been removed. * Add minimum network namespace support for Linux. * New command "lacp/show-stats" - ovs-ofctl: * ovs-ofctl now accepts and display table names in place of numbers. By default it always accepts names and in interactive use it displays them; use --names or --no-names to override. See ovs-ofctl(8) for details. - ovs-vsctl: New commands "add-bond-iface" and "del-bond-iface". - ovs-dpctl: * New commands "ct-set-limits", "ct-del-limits", and "ct-get-limits". - OpenFlow: * OFPT_ROLE_STATUS is now available in OpenFlow 1.3. * OpenFlow 1.5 extensible statistics (OXS) now implemented. * New OpenFlow 1.0 extensions for group support. * Default selection method for select groups is now dp_hash with improved accuracy. - Linux datapath * Add support for compiling OVS with the latest Linux 4.14 kernel. * Added support for meters. * Add support for conntrack zone limit. - ovn: * Implemented icmp4/icmp6/tcp_reset actions in order to drop the packet and reply with a RST for TCP or ICMPv4/ICMPv6 unreachable message for other IPv4/IPv6-based protocols whenever a reject ACL rule is hit. * ACL match conditions can now match on Port_Groups as well as address sets that are automatically generated by Port_Groups. ACLs can be applied directly to Port_Groups as well. * ovn-nbctl can now run as a daemon (long-lived, background process). See ovn-nbctl(8) for details. - DPDK: * New 'check-dpdk' Makefile target to run a new system testsuite. See Testing topic for the details. * Add LSC interrupt support for DPDK physical devices. * Allow init to fail and record DPDK status/version in OVS database. * Add experimental flow hardware offload support * Support both shared and per port mempools for DPDK devices. - Userspace datapath: * Commands ovs-appctl dpif-netdev/pmd-*-show can now work on a single PMD * Detailed PMD performance metrics available with new command ovs-appctl dpif-netdev/pmd-perf-show * Supervision of PMD performance metrics and logging of suspicious iterations * Add signature match cache (SMC) as experimental feature. When turned on, it improves throughput when traffic has many more flows than EMC size. - ERSPAN: * Implemented ERSPAN protocol (draft-foschiano-erspan-00.txt) for both kernel datapath and userspace datapath. * Added port-based and flow-based ERSPAN tunnel port support, added OpenFlow rules matching ERSPAN fields. See ovs-fields(7). - ovs-pki * ovs-pki now generates x.509 version 3 certificate. The new format adds subjectAltName field and sets its value the same as common name (CN). v2.9.0 - 19 Feb 2018 -------------------- - NSH implementation now conforms to latest draft (draft-ietf-sfc-nsh-28). * Add ttl field. * Add a new action dec_nsh_ttl. * Enable NSH support in kernel datapath. - OVSDB has new, experimental support for database clustering: * New high-level documentation in ovsdb(7). * New file format documentation for developers in ovsdb(5). * Protocol documentation moved from ovsdb-server(1) to ovsdb-server(7). * ovsdb-server now supports online schema conversion via "ovsdb-client convert". * ovsdb-server now always hosts a built-in database named _Server. See ovsdb-server(5) for more details. * ovsdb-client: New "get-schema-cksum", "query", "backup", "restore", and "wait" commands. New --timeout option. * ovsdb-tool: New "create-cluster", "join-cluster", "db-cid", "db-sid", "db-local-address", "db-is-clustered", "db-is-standalone", "db-name", "schema-name", "compare-versions", and "check-cluster" commands. * ovsdb-server: New ovs-appctl commands for managing clusters. * ovs-sandbox: New support for clustered databases. - ovs-vsctl and other commands that display data in tables now support a --max-column-width option to limit column width. - No longer slow-path traffic that sends to a controller. Applications, such as OVN ACL logging, want to send a copy of a packet to a controller while leaving the actual packet forwarding in the datapath. - OVN: * The "requested-chassis" option for a logical switch port now accepts a chassis "hostname" in addition to a chassis "name". * IPv6 - Added support to send IPv6 Router Advertisement packets in response to the IPv6 Router Solicitation packets from the VIF ports. - Added support to generate Neighbor Solicitation packets using the OVN action 'nd_ns' to resolve unknown next hop MAC addresses for the IPv6 packets. * Add support for QoS bandwidth limit with DPDK. * ovn-ctl: New commands run_nb_ovsdb and run_sb_ovsdb. * ovn-sbctl, ovn-nbctl: New options --leader-only, --no-leader-only. - OpenFlow: * ct_clear action is now backed by kernel datapath. Support is probed for when OVS starts. - Linux kernel 4.13 * Add support for compiling OVS with the latest Linux 4.13 kernel - ovs-dpctl and related ovs-appctl commands: * "flush-conntrack" now accept a 5-tuple to delete a specific connection tracking entry. * New "ct-set-maxconns", "ct-get-maxconns", and "ct-get-nconns" commands for userspace datapath. - No longer send packets to the Linux TAP device if it's DOWN unless it is in another networking namespace. - DPDK: * Add support for DPDK v17.11 * Add support for vHost IOMMU * New debug appctl command 'netdev-dpdk/get-mempool-info'. * All the netdev-dpdk appctl commands described in ovs-vswitchd man page. * Custom statistics: - DPDK physical ports now return custom set of "dropped", "error" and "management" statistics. - ovs-ofctl dump-ports command now prints new of set custom statistics if available (for OpenFlow 1.4+). * Switch from round-robin allocation of rxq to pmd assignments to a utilization-based allocation. * New appctl command 'dpif-netdev/pmd-rxq-rebalance' to rebalance rxq to pmd assignments. * Add rxq utilization of pmd to appctl 'dpif-netdev/pmd-rxq-show'. * Add support for vHost dequeue zero copy (experimental). - Userspace datapath: * Output packet batching support. - vswitchd: * Datapath IDs may now be specified as 0x1 (etc.) instead of 16 digits. * Configuring a controller, or unconfiguring all controllers, now deletes all groups and meters (as well as all flows). - New --enable-sparse configure option enables "sparse" checking by default. - Added additional information to vhost-user status. v2.8.0 - 31 Aug 2017 -------------------- - ovs-ofctl: * ovs-ofctl can now accept and display port names in place of numbers. By default it always accepts names and in interactive use it displays them; use --names or --no-names to override. See ovs-ofctl(8) for details. * "ovs-ofctl dump-flows" now accepts --no-stats to omit flow statistics. - New ovs-dpctl command "ct-stats-show" to show connection tracking stats. - Tunnels: * Added support to set packet mark for tunnel endpoint using `egress_pkt_mark` OVSDB option. * When using Linux kernel datapath tunnels may be created using rtnetlink. This will allow us to take advantage of new tunnel features without having to make changes to the vport modules. - EMC insertion probability is reduced to 1% and is configurable via the new 'other_config:emc-insert-inv-prob' option. - DPDK: * DPDK log messages redirected to OVS logging subsystem. Log level can be changed in a usual OVS way using 'ovs-appctl vlog' commands for 'dpdk' module. Lower bound still can be configured via extra arguments for DPDK EAL. * dpdkvhostuser ports are marked as deprecated. They will be removed in an upcoming release. * Support for DPDK v17.05.1. - IPFIX now provides additional counters: * Total counters since metering process startup. * Per-flow TCP flag counters. * Multicast, broadcast, and unicast counters. - New support for multiple VLANs (802.1ad or "QinQ"), including a new "dot1q-tunnel" port VLAN mode. - In ovn-vsctl and vtep-ctl, record UUIDs in commands may now be abbreviated to 4 hex digits. - Userspace Datapath: * Added NAT support for userspace datapath. * Added FTP and TFTP support with NAT for userspace datapath. * Experimental NSH (Network Service Header) support in userspace datapath. - OVN: * New built-in DNS support. * IPAM for IPv4 can now exclude user-defined addresses from assignment. * IPAM can now assign IPv6 addresses. * Make the DHCPv4 router setting optional. * Gratuitous ARP for NAT addresses on a distributed logical router. * Allow ovn-controller SSL configuration to be obtained from vswitchd database. * ovn-trace now has basic support for tracing distributed firewalls. * In ovn-nbctl and ovn-sbctl, record UUIDs in commands may now be abbreviated to 4 hex digits. * "ovn-sbctl lflow-list" can now print OpenFlow flows that correspond to logical flows. * Now uses OVSDB RBAC support to reduce impact of compromised hypervisors. * Multiple chassis may now be specified for L3 gateways. When more than one chassis is specified, OVN will manage high availability for that gateway. * Add support for ACL logging. * ovn-northd now has native support for active-standby high availability. - Tracing with ofproto/trace now traces through recirculation. - OVSDB: * New support for role-based access control (see ovsdb-server(1)). - New commands 'stp/show' and 'rstp/show' (see ovs-vswitchd(8)). - OpenFlow: * All features required by OpenFlow 1.4 are now implemented, so ovs-vswitchd now enables OpenFlow 1.4 by default (in addition to OpenFlow 1.0 to 1.3). * Increased support for OpenFlow 1.6 (draft). * Bundles now support hashing by just nw_src or nw_dst. * The "learn" action now supports a "limit" option (see ovs-ofctl(8)). * The port status bit OFPPS_LIVE now reflects link aliveness. * OpenFlow 1.5 packet-out is now supported. * Support for OpenFlow 1.5 field packet_type and packet-type-aware pipeline (PTAP). * Added generic encap and decap actions (EXT-382). First supported use case is encap/decap for Ethernet. * Added NSH (Network Service Header) support in userspace Used generic encap and decap actions to implement encapsulation and decapsulation of NSH header. IETF NSH draft - https://datatracker.ietf.org/doc/draft-ietf-sfc-nsh/ * Conntrack state is only available to the processing path that follows the "recirc_table" argument of the ct() action. Starting in OVS 2.8, this state is now cleared for the current processing path whenever ct() is called. - Fedora Packaging: * OVN services are no longer restarted automatically after upgrade. * ovs-vswitchd and ovsdb-server run as non-root users by default. - Add --cleanup option to command 'ovs-appctl exit' (see ovs-vswitchd(8)). - L3 tunneling: * Use new tunnel port option "packet_type" to configure L2 vs. L3. * In conjunction with PTAP tunnel ports can handle a mix of L2 and L3 payload. * New vxlan tunnel extension "gpe" to support VXLAN-GPE tunnels. * New support for non-Ethernet (L3) payloads in GRE and VXLAN-GPE. - The BFD detection multiplier is now user-configurable. - Add experimental support for hardware offloading * HW offloading is disabled by default. * HW offloading is done through the TC interface. - IPv6 link local addresses are now supported on Linux. Use % to designate the scope device. v2.7.0 - 21 Feb 2017 --------------------- - Utilities and daemons that support SSL now allow protocols and ciphers to be configured with --ssl-protocols and --ssl-ciphers. - OVN: * QoS is now implemented via egress shaping rather than ingress policing. * DSCP marking is now supported, via the new northbound QoS table. * IPAM now supports fixed MAC addresses. * Support for source IP address based routing. * ovn-trace: - New --ovs option to also print OpenFlow flows. - put_dhcp_opts and put_dhcp_optsv6 actions may now be traced. * Support for managing SSL and remote connection configuration in northbound and southbound databases. * TCP connections to northbound and southbound databases are no longer enabled by default and must be explicitly configured. See documentation for ovn-sbctl/ovn-nbctl "set-connection" command or the ovn-ctl "--db-sb-create-insecure-remote" and "--db-nb-create-insecure-remote" command-line options for information regarding remote connection configuration. * New appctl "inject-pkt" command in ovn-controller that allows packets to be injected into the connected OVS instance. * Distributed logical routers may now be connected directly to logical switches with localnet ports, by specifying a "redirect-chassis" on the distributed gateway port of the logical router. NAT rules may be specified directly on the distributed logical router, and are handled either centrally on the "redirect-chassis", or in many cases are handled locally on the hypervisor where the corresponding logical port resides. Gratuitous ARP for NAT addresses on a distributed logical router is not yet supported, but will be added in a future version. - Fixed regression in table stats maintenance introduced in OVS 2.3.0, wherein the number of OpenFlow table hits and misses was not accurate. - OpenFlow: * OFPT_PACKET_OUT messages are now supported in bundles. * A new "selection_method=dp_hash" type for OpenFlow select group bucket selection that uses the datapath computed 5-tuple hash without making datapath flows match the 5-tuple fields, which is useful for more efficient load balancing, for example. This uses the Netronome extension to OpenFlow 1.5+ that allows control over the OpenFlow select groups selection method. See "selection_method" and related options in ovs-ofctl(8) for details. * The "sample" action now supports "ingress" and "egress" options. * The "ct" action now supports the TFTP ALG where support is available. * New actions "clone" and "ct_clear". * The "meter" action is now supported in the userspace datapath. - ovs-ofctl: * 'bundle' command now supports packet-out messages. * New syntax for 'ovs-ofctl packet-out' command, which uses the same string parser as the 'bundle' command. The old 'packet-out' syntax is deprecated and will be removed in a later OVS release. * New unixctl "ofctl/packet-out" command, which can be used to instruct a flow monitor to issue OpenFlow packet-out messages. - ovsdb-server: * Remote connections can now be made read-only (see ovsdb-server(1)). - Tunnels: * TLV mappings for protocols such as Geneve are now segregated on a per-OpenFlow bridge basis rather than globally. (The interface has not changed.) * Removed support for IPsec tunnels. - DPDK: * New option 'n_rxq_desc' and 'n_txq_desc' fields for DPDK interfaces which set the number of rx and tx descriptors to use for the given port. * Support for DPDK v16.11. * Support for rx checksum offload. Refer DPDK HOWTO for details. * Port Hotplug is now supported. * DPDK physical ports can now have arbitrary names. The PCI address of the device must be set using the 'dpdk-devargs' option. Compatibility with the old dpdk naming scheme is broken, and as such a device will not be available for use until a valid dpdk-devargs is specified. * Virtual DPDK Poll Mode Driver (vdev PMD) support. * Removed experimental tag. - Fedora packaging: * A package upgrade does not automatically restart OVS service. - ovs-vswitchd/ovs-vsctl: * Ports now have a "protected" flag. Protected ports can not forward frames to other protected ports. Unprotected ports can receive and forward frames to protected and other unprotected ports. - ovs-vsctl, ovn-nbctl, ovn-sbctl, vtep-ctl: * Database commands now accept integer ranges, e.g. "set port eth0 trunks=1-10" to enable trunking VLANs 1 to 10. v2.6.0 - 27 Sep 2016 --------------------- - First supported release of OVN. See ovn-architecture(7) for more details. - ovsdb-server: * New "monitor_cond" "monitor_cond_update" and "update2" extensions to RFC 7047. - OpenFlow: * OpenFlow 1.3+ bundles now expire after 10 seconds since the last time the bundle was either opened, modified, or closed. * OpenFlow 1.3 Extension 230, adding OpenFlow Bundles support, is now implemented. * OpenFlow 1.3+ bundles are now supported for group mods as well as flow mods and port mods. Both 'atomic' and 'ordered' bundle flags are supported for group mods as well as flow mods. * Internal OpenFlow rule representation for load and set-field actions is now much more memory efficient. For a complex flow table this can reduce rule memory consumption by 40%. * Bundles are now much more memory efficient than in OVS 2.5. Together with memory efficiency improvements in OpenFlow rule representation, the peak OVS resident memory use during a bundle commit for large complex set of flow mods can be only 25% of that in OVS 2.5 (4x lower). * OpenFlow 1.1+ OFPT_QUEUE_GET_CONFIG_REQUEST now supports OFPP_ANY. * OpenFlow 1.4+ OFPMP_QUEUE_DESC is now supported. * OpenFlow 1.4+ OFPT_TABLE_STATUS is now supported. * New property-based packet-in message format NXT_PACKET_IN2 with support for arbitrary user-provided data and for serializing flow table traversal into a continuation for later resumption. * New extension message NXT_SET_ASYNC_CONFIG2 to allow OpenFlow 1.4-like control over asynchronous messages in earlier versions of OpenFlow. * New OpenFlow extension NXM_NX_MPLS_TTL to provide access to MPLS TTL. * New output option, output(port=N,max_len=M), to allow truncating a packet to size M bytes when outputting to port N. * New command OFPGC_ADD_OR_MOD for OFPT_GROUP_MOD message that adds a new group or modifies an existing groups * The optional OpenFlow packet buffering feature is deprecated in this release, and will be removed in the next OVS release (2.7). After the change OVS always sends the 'buffer_id' as 0xffffffff in packet-in messages and will send an error response if any other value of this field is included in packet-out and flow mod sent by a controller. Controllers are already expected to work properly in cases where the switch can not buffer packets, so this change should not affect existing users. * New OpenFlow extension NXT_CT_FLUSH_ZONE to flush conntrack zones. - Improved OpenFlow version compatibility for actions: * New OpenFlow extension to support the "group" action in OpenFlow 1.0. * OpenFlow 1.0 "enqueue" action now properly translated to OpenFlow 1.1+. * OpenFlow 1.1 "mod_nw_ecn" and OpenFlow 1.1+ "mod_nw_ttl" actions now properly translated to OpenFlow 1.0. - ovs-ofctl: * queue-get-config command now allows a queue ID to be specified. * '--bundle' option can now be used with OpenFlow 1.3 and with group mods. * New "bundle" command allows executing a mixture of flow and group mods as a single atomic transaction. * New option "--color" to produce colorized output for some commands. * New option '--may-create' to use OFPGC_ADD_OR_MOD in mod-group command. - IPFIX: * New "sampling_port" option for "sample" action to allow sampling ingress and egress tunnel metadata with IPFIX. * New ovs-ofctl commands "dump-ipfix-bridge" and "dump-ipfix-flow" to dump bridge IPFIX statistics and flow based IPFIX statistics. * New setting other-config:virtual_obs_id to add an arbitrary string to IPFIX records. - Linux: * OVS Linux datapath now implements Conntrack NAT action with all supported Linux kernels. * Support for truncate action. * New QoS type "linux-noop" that prevents Open vSwitch from trying to manage QoS for a given port (useful when other software manages QoS). - DPDK: * New option "n_rxq" for PMD interfaces. Old 'other_config:n-dpdk-rxqs' is no longer supported. Not supported by vHost interfaces. For them number of rx and tx queues is applied from connected virtio device. * New 'other_config:pmd-rxq-affinity' field for PMD interfaces, that allows to pin port's rx queues to desired cores. * New appctl command 'dpif-netdev/pmd-rxq-show' to check the port/rxq assignment. * Type of log messages from PMD threads changed from INFO to DBG. * QoS functionality with sample egress-policer implementation. * The mechanism for configuring DPDK has changed to use database * Sensible defaults have been introduced for many of the required configuration options * DB entries have been added for many of the DPDK EAL command line arguments. Additional arguments can be passed via the dpdk-extra entry. * Add ingress policing functionality. * PMD threads servicing vHost User ports can now come from the NUMA node that device memory is located on if CONFIG_RTE_LIBRTE_VHOST_NUMA is enabled in DPDK. * Basic connection tracking for the userspace datapath (no ALG, fragmentation or NAT support yet) * Support for DPDK 16.07 * Optional support for DPDK pdump enabled. * Jumbo frame support * Remove dpdkvhostcuse port type. * OVS client mode for vHost and vHost reconnect (Requires QEMU 2.7) * 'dpdkvhostuserclient' port type. - Increase number of registers to 16. - ovs-benchmark: This utility has been removed due to lack of use and bitrot. - ovs-appctl: * New "vlog/close" command. - ovs-ctl: * Added the ability to selectively start the forwarding and database functions (ovs-vswitchd and ovsdb-server, respectively). - ovsdb-server: * Remove max number of sessions limit, to enable connection scaling testing. - python: * Added support for Python 3.4+ in addition to existing support for 2.7+. - SELinux: * Introduced SELinux policy package. - Datapath Linux kernel compatibility. * Dropped support for kernel older than 3.10. * Removed VLAN splinters feature. * Datapath supports kernel upto 4.7. - Tunnels: * Flow based tunnel match and action can be used for IPv6 address using tun_ipv6_src, tun_ipv6_dst fields. * Added support for IPv6 tunnels, for details checkout FAQ. * Deprecated support for IPsec tunnels ports. - A wrapper script, 'ovs-tcpdump', to easily port-mirror an OVS port and watch with tcpdump - Introduce --no-self-confinement flag that allows daemons to work with sockets outside their run directory. - ovs-pki: Changed message digest algorithm from SHA-1 to SHA-512 because SHA-1 is no longer secure and some operating systems have started to disable it in OpenSSL. - Add 'mtu_request' column to the Interface table. It can be used to configure the MTU of the ports. Known issues: - Using openvswitch module in conjunction with upstream Linux tunnels: * When using the openvswitch module distributed with OVS against kernel versions 4.4 to 4.6, the openvswitch module cannot be loaded or used at the same time as "ip_gre". - Conntrack FTP ALGs: When using the openvswitch module distributed with OVS, particular Linux distribution kernels versions may provide diminished functionality. This typically affects active FTP data connections when using "actions=ct(alg=ftp),..." in flow tables. Specifically: * Centos 7.1 kernels (3.10.0-2xx) kernels are unable to correctly set up expectations for FTP data connections in multiple zones, eg "actions=ct(zone=1,alg=ftp),ct(zone=2,alg=ftp),...". Executing the "ct" action for subsequent data connections may fail to determine that the data connection is "related" to an existing connection. * Centos 7.2 kernels (3.10.0-3xx) kernels may not establish FTP ALG state correctly for NATed connections. As a result, flows that perform NAT, eg "actions=ct(nat,ftp=alg,table=1),..." may fail to NAT the packet, and will populate the "ct_state=inv" bit in the flow. v2.5.0 - 26 Feb 2016 --------------------- - Dropped support for Python older than version 2.7. As a consequence, using Open vSwitch 2.5 or later on XenServer 6.5 or earlier (which have Python 2.4) requires first installing Python 2.7. - OpenFlow: * Group chaining (where one OpenFlow group triggers another) is now supported. * OpenFlow 1.4+ "importance" is now considered for flow eviction. * OpenFlow 1.4+ OFPTC_EVICTION is now implemented. * OpenFlow 1.4+ OFPTC_VACANCY_EVENTS is now implemented. * OpenFlow 1.4+ OFPMP_TABLE_DESC is now implemented. * Allow modifying the ICMPv4/ICMPv6 type and code fields. * OpenFlow 1.4+ OFPT_SET_ASYNC_CONFIG and OFPT_GET_ASYNC_CONFIG are now implemented. - ovs-ofctl: * New "out_group" keyword for OpenFlow 1.1+ matching on output group. - Tunnels: * Geneve tunnels can now match and set options and the OAM bit. * The nonstandard GRE64 tunnel extension has been dropped. - Support Multicast Listener Discovery (MLDv1 and MLDv2). - Add 'symmetric_l3l4' and 'symmetric_l3l4+udp' hash functions. - sFlow agent now reports tunnel and MPLS structures. - New 'check-system-userspace', 'check-kmod' and 'check-kernel' Makefile targets to run a new system testsuite. These tests can be run inside a Vagrant box. See INSTALL.md for details - Mark --syslog-target argument as deprecated. It will be removed in the next OVS release. - Added --user option to all daemons - Add support for connection tracking through the new "ct" action and "ct_state"/"ct_zone"/"ct_mark"/"ct_label" match fields. Only available on Linux kernels with the connection tracking module loaded. - Add experimental version of OVN. OVN, the Open Virtual Network, is a system to support virtual network abstraction. OVN complements the existing capabilities of OVS to add native support for virtual network abstractions, such as virtual L2 and L3 overlays and security groups. - RHEL packaging: * DPDK ports may now be created via network scripts (see README.RHEL). - DPDK: * Requires DPDK 2.2 * Added multiqueue support to vhost-user * Note: QEMU 2.5+ required for multiqueue support v2.4.0 - 20 Aug 2015 --------------------- - Flow table modifications are now atomic, meaning that each packet now sees a coherent version of the OpenFlow pipeline. For example, if a controller removes all flows with a single OpenFlow "flow_mod", no packet sees an intermediate version of the OpenFlow pipeline where only some of the flows have been deleted. - Added support for SFQ, FQ_CoDel and CoDel qdiscs. - Add bash command-line completion support for ovs-vsctl Please check utilities/ovs-command-compgen.INSTALL.md for how to use. - The MAC learning feature now includes per-port fairness to mitigate MAC flooding attacks. - New support for a "conjunctive match" OpenFlow extension, which allows constructing OpenFlow matches of the form "field1 in {a,b,c...} AND field2 in {d,e,f...}" and generalizations. For details, see documentation for the "conjunction" action in ovs-ofctl(8). - Add bash command-line completion support for ovs-appctl/ovs-dpctl/ ovs-ofctl/ovsdb-tool commands. Please check utilities/ovs-command-compgen.INSTALL.md for how to use. - The "learn" action supports a new flag "delete_learned" that causes the learned flows to be deleted when the flow with the "learn" action is deleted. - Basic support for the Geneve tunneling protocol. It is not yet possible to generate or match options. This is planned for a future release. The protocol is documented at http://tools.ietf.org/html/draft-gross-geneve-00 - The OVS database now reports controller rate limiting statistics. - sflow now exports information about LACP-based bonds, port names, and OpenFlow port numbers, as well as datapath performance counters. - ovs-dpctl functionality is now available for datapaths integrated into ovs-vswitchd, via ovs-appctl. Some existing ovs-appctl commands are now redundant and will be removed in a future release. See ovs-vswitchd(8) for details. - OpenFlow: * OpenFlow 1.4 bundles are now supported for flow mods and port mods. For flow mods, both 'atomic' and 'ordered' bundle flags are trivially supported, as all bundled messages are executed in the order they were added and all flow table modifications are now atomic to the datapath. Port mods may not appear in atomic bundles, as port status modifications are not atomic. * IPv6 flow label and neighbor discovery fields are now modifiable. * OpenFlow 1.5 extended registers are now supported. * The OpenFlow 1.5 actset_output field is now supported. * OpenFlow 1.5 Copy-Field action is now supported. * OpenFlow 1.5 masked Set-Field action is now supported. * OpenFlow 1.3+ table features requests are now supported (read-only). * Nicira extension "move" actions may now be included in action sets. * "resubmit" actions may now be included in action sets. The resubmit is executed last, and only if the action set has no "output" or "group" action. * OpenFlow 1.4+ flow "importance" is now maintained in the flow table. * A new Netronome extension to OpenFlow 1.5+ allows control over the fields hashed for OpenFlow select groups. See "selection_method" and related options in ovs-ofctl(8) for details. - ovs-ofctl has a new '--bundle' option that makes the flow mod commands ('add-flow', 'add-flows', 'mod-flows', 'del-flows', and 'replace-flows') use an OpenFlow 1.4 bundle to operate the modifications as a single atomic transaction. If any of the flow mods in a transaction fail, none of them are executed. All flow mods in a bundle appear to datapath lookups simultaneously. - ovs-ofctl 'add-flow' and 'add-flows' commands now accept arbitrary flow mods as an input by allowing the flow specification to start with an explicit 'add', 'modify', 'modify_strict', 'delete', or 'delete_strict' keyword. A missing keyword is treated as 'add', so this is fully backwards compatible. With the new '--bundle' option all the flow mods are executed as a single atomic transaction using an OpenFlow 1.4 bundle. - ovs-pki: Changed message digest algorithm from MD5 to SHA-1 because MD5 is no longer secure and some operating systems have started to disable it in OpenSSL. - ovsdb-server: New OVSDB protocol extension allows inequality tests on "optional scalar" columns. See ovsdb-server(1) for details. - ovs-vsctl now permits immutable columns in a new row to be modified in the same transaction that creates the row. - test-controller has been renamed ovs-testcontroller at request of users who find it useful for testing basic OpenFlow setups. It is still not a necessary or desirable part of most Open vSwitch deployments. - Support for travis-ci.org based continuous integration builds has been added. Build failures are reported to build@openvswitch.org. See INSTALL.md file for additional details. - Support for the Rapid Spanning Tree Protocol (IEEE 802.1D-2004). The implementation has been tested successfully against the Ixia Automated Network Validation Library (ANVL). - Stats are no longer updated on fake bond interface. - Keep active bond interface selection across OVS restart. - A simple wrapper script, 'ovs-docker', to integrate OVS with Docker containers. If and when there is a native integration of Open vSwitch with Docker, the wrapper script will be retired. - Added support for DPDK Tunneling. VXLAN, GRE, and Geneve are supported protocols. This is generic tunneling mechanism for userspace datapath. - Support for multicast snooping (IGMPv1, IGMPv2 and IGMPv3) - Support for Linux kernels up to 4.0.x - The documentation now use the term 'destination' to mean one of syslog, console or file for vlog logging instead of the previously used term 'facility'. - Support for VXLAN Group Policy extension - Initial support for the IETF Auto-Attach SPBM draft standard. This contains rudimentary support for the LLDP protocol as needed for Auto-Attach. - The default OpenFlow and OVSDB ports are now the IANA-assigned numbers. OpenFlow is 6653 and OVSDB is 6640. - Support for DPDK vHost. - Support for outer UDP checksums in Geneve and VXLAN. - The kernel vports with dependencies are no longer part of the overall openvswitch.ko but built and loaded automatically as individual kernel modules (vport-*.ko). - Support for STT tunneling. - ovs-sim: New developer tool for simulating multiple OVS instances. See ovs-sim(1) for more information. - Support to configure method (--syslog-method argument) that determines how daemons will talk with syslog. - Support for "ovs-appctl vlog/list-pattern" command that lets to query logging message format for each destination. v2.3.0 - 14 Aug 2014 --------------------- - OpenFlow 1.1, 1.2, and 1.3 are now enabled by default in ovs-vswitchd. - Linux kernel datapath now has an exact match cache optimizing the flow matching process. - Datapath flows now have partially wildcarded tranport port field matches. This reduces userspace upcalls, but increases the number of different masks in the datapath. The kernel datapath exact match cache removes the overhead of matching the incoming packets with the larger number of masks, but when paired with an older kernel module, some workloads may perform worse with the new userspace. - Compatibility with autoconf 2.63 (previously >=2.64) v2.2.0 - Internal Release --------------------- - Internal ports are no longer brought up by default, because it should be an administrator task to bring up devices as they are configured properly. - ovs-vsctl now reports when ovs-vswitchd fails to create a new port or bridge. - Port creation and configuration errors are now stored in a new error column of the Interface table and included in 'ovs-vsctl show'. - The "ovsdbmonitor" graphical tool has been removed, because it was poorly maintained and not widely used. - New "check-ryu" Makefile target for running Ryu tests for OpenFlow controllers against Open vSwitch. See INSTALL.md for details. - Added IPFIX support for SCTP flows and templates for ICMPv4/v6 flows. - Upon the receipt of a SIGHUP signal, ovs-vswitchd no longer reopens its log file (it will terminate instead). Please use 'ovs-appctl vlog/reopen' instead. - Support for Linux kernels up to 3.14. From Kernel 3.12 onwards OVS uses tunnel API for GRE and VXLAN. - Added DPDK support. - Added support for custom vlog patterns in Python v2.1.0 - 19 Mar 2014 --------------------- - Address prefix tracking support for flow tables. New columns "prefixes" in OVS-DB table "Flow_Table" controls which packet header fields are used for address prefix tracking. Prefix tracking allows the classifier to skip rules with longer than necessary prefixes, resulting in better wildcarding for datapath flows. Default configuration is to not use any fields for prefix tracking. However, if any flow tables contain both exact matches and masked matches for IP address fields, OVS performance may be increased by using this feature. * As of now, the fields for which prefix lookup can be enabled are: 'tun_id', 'tun_src', 'tun_dst', 'nw_src', 'nw_dst' (or aliases 'ip_src' and 'ip_dst'), 'ipv6_src', and 'ipv6_dst'. (Using this feature for 'tun_id' would only make sense if the tunnel IDs have prefix structure similar to IP addresses.) * There is a maximum number of fields that can be enabled for any one flow table. Currently this limit is 3. * Examples: $ ovs-vsctl set Bridge br0 flow_tables:0=@N1 -- \ --id=@N1 create Flow_Table name=table0 $ ovs-vsctl set Bridge br0 flow_tables:1=@N1 -- \ --id=@N1 create Flow_Table name=table1 $ ovs-vsctl set Flow_Table table0 prefixes=ip_dst,ip_src $ ovs-vsctl set Flow_Table table1 prefixes=[] - TCP flags matching: OVS now supports matching of TCP flags. This has an adverse performance impact when using OVS userspace 1.10 or older (no megaflows support) together with the new OVS kernel module. It is recommended that the kernel and userspace modules both are upgraded at the same time. - The default OpenFlow and OVSDB ports will change to IANA-assigned numbers in a future release. Consider updating your installations to specify port numbers instead of using the defaults. - OpenFlow: * The OpenFlow 1.1+ "Write-Actions" instruction is now supported. * OVS limits the OpenFlow port numbers it assigns to port 32767 and below, leaving port numbers above that range free for assignment by the controller. * ovs-vswitchd now honors changes to the "ofport_request" column in the Interface table by changing the port's OpenFlow port number. * The Open vSwitch software switch now supports OpenFlow groups. - ovs-vswitchd.conf.db.5 man page will contain graphviz/dot diagram only if graphviz package was installed at the build time. - Support for Linux kernels up to 3.11 - ovs-dpctl: The "show" command also displays mega flow mask stats. - ovs-ofctl: * New command "ofp-parse-pcap" to dump OpenFlow from PCAP files. - ovs-controller has been renamed test-controller. It is no longer packaged or installed by default, because too many users assumed incorrectly that ovs-controller was a necessary or desirable part of an Open vSwitch deployment. - Added vlog option to export to a UDP syslog sink. - ovsdb-client: * The "monitor" command can now monitor all tables in a database, instead of being limited to a single table. - The flow-eviction-threshold has been replaced by the flow-limit which is a hard limit on the number of flows in the datapath. It defaults to 200,000 flows. OVS automatically adjusts this number depending on network conditions. - Added IPv6 support for active and passive socket communications. v2.0.0 - 15 Oct 2013 --------------------- - The ovs-vswitchd process is no longer single-threaded. Multiple threads are now used to handle flow set up and asynchronous logging. - OpenFlow: * Experimental support for OpenFlow 1.1 (in addition to 1.2 and 1.3, which had experimental support in 1.10). * Experimental protocol support for OpenFlow 1.1+ groups. This does not yet include an implementation in the Open vSwitch software switch. * Experimental protocol support for OpenFlow 1.2+ meters. This does not yet include an implementation in the Open vSwitch software switch. * New support for matching outer source and destination IP address of tunneled packets, for tunnel ports configured with the newly added "remote_ip=flow" and "local_ip=flow" options. * Support for matching on metadata 'pkt_mark' for interacting with other system components. On Linux this corresponds to the skb mark. * Support matching, rewriting SCTP ports - The Interface table in the database has a new "ifindex" column to report the interface's OS-assigned ifindex. - New "check-oftest" Makefile target for running OFTest against Open vSwitch. See README-OFTest for details. - The flow eviction threshold has been moved to the Open_vSwitch table. - Database names are now mandatory when specifying ovsdb-server options through database paths (e.g. Private key option with the database name should look like "--private-key=db:Open_vSwitch,SSL,private_key"). - Added ovs-dev.py, a utility script helpful for Open vSwitch developers. - Support for Linux kernels up to 3.10 - ovs-ofctl: * New "ofp-parse" for printing OpenFlow messages read from a file. * New commands for OpenFlow 1.1+ groups. - Added configurable flow caching support to IPFIX exporter. - Dropped support for Linux pre-2.6.32. - Log file timestamps and ovsdb commit timestamps are now reported with millisecond resolution. (Previous versions only reported whole seconds.) v1.11.0 - 28 Aug 2013 --------------------- - Support for megaflows, which allows wildcarding in the kernel (and any dpif implementation that supports wildcards). Depending on the flow table and switch configuration, flow set up rates are close to the Linux bridge. - The "tutorial" directory contains a new tutorial for some advanced Open vSwitch features. - Stable bond mode has been removed. - The autopath action has been removed. - New support for the data encapsulation format of the LISP tunnel protocol (RFC 6830). An external control plane or manual flow setup is required for EID-to-RLOC mapping. - OpenFlow: * The "dec_mpls_ttl" and "set_mpls_ttl" actions from OpenFlow 1.1 and later are now implemented. * New "stack" extension for use in actions, to push and pop from NXM fields. * The "load" and "set_field" actions can now modify the "in_port". (This allows one to enable output to a flow's input port by setting the in_port to some unused value, such as OFPP_NONE.) - ovs-dpctl: * New debugging commands "add-flow", "mod-flow", "del-flow". * "dump-flows" now has a -m option to increase output verbosity. - In dpif-based bridges, cache action translations, which can improve flow set up performance by 80% with a complicated flow table. - New syslog format, prefixed with "ovs|", to be easier to filter. - RHEL: Removes the default firewall rule that allowed GRE traffic to pass through. Any users that relied on this automatic firewall hole will have to manually configure it. The ovs-ctl(8) manpage documents the "enable-protocol" command that can be used as an alternative. - New CFM demand mode which uses data traffic to indicate interface liveness. v1.10.0 - 01 May 2013 --------------------- - Bridge compatibility support has been removed. Any uses that rely on ovs-brcompatd will have to stick with Open vSwitch 1.9.x or adapt to native Open vSwitch support (e.g. use ovs-vsctl instead of brctl). - The maximum size of the MAC learning table is now configurable. - With the Linux datapath, packets for new flows are now queued separately on a per-port basis, so it should no longer be possible for a large number of new flows arriving on one port to prevent new flows from being processed on other ports. - ovs-vsctl: * Previously ovs-vsctl would retry connecting to the database forever, causing it to hang if ovsdb-server was not running. Now, ovs-vsctl only tries once by default (use --retry to try forever). This change means that you may want to remove uses of --timeout to avoid hangs in ovs-vsctl calls. * Many "ovs-vsctl" database commands now accept an --if-exists option. Please refer to the ovs-vsctl manpage for details. - OpenFlow: - Experimental support for newer versions of OpenFlow. See the "What versions of OpenFlow does Open vSwitch support?" question in the FAQ for more details. - The OpenFlow "dp_desc" may now be configured by setting the value of other-config:dp-desc in the Bridge table. - It is possible to request the OpenFlow port number with the "ofport_request" column in the Interface table. - The NXM flow_removed message now reports the OpenFlow table ID from which the flow was removed. - Tunneling: - New support for the VXLAN tunnel protocol (see the IETF draft here: http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-03). - Tunneling requires the version of the kernel module paired with Open vSwitch 1.9.0 or later. - Inheritance of the Don't Fragment bit in IP tunnels (df_inherit) is no longer supported. - Path MTU discovery is no longer supported. - CAPWAP tunneling support removed. - Tunnels with multicast destination ports are no longer supported. - ovs-dpctl: - The "dump-flows" and "del-flows" no longer require an argument if only one datapath exists. - ovs-appctl: - New "vlog/disable-rate-limit" and "vlog/enable-rate-limit" commands available allow control over logging rate limits. - New "dpif/dump-dps", "dpif/show", and "dpif/dump-flows" command that mimic the equivalent ovs-dpctl commands. - The ofproto library is now responsible for assigning OpenFlow port numbers. An ofproto implementation should assign them when port_construct() is called. - All dpif-based bridges of a particular type share a common datapath called "ovs-", e.g. "ovs-system". The ovs-dpctl commands will now return information on that shared datapath. To get the equivalent bridge-specific information, use the new "ovs-appctl dpif/*" commands. - Backward-incompatible changes: - Earlier Open vSwitch versions treated ANY as a wildcard in flow syntax. OpenFlow 1.1 adds a port named ANY, which introduces a conflict. ANY was rarely used in flow syntax, so we chose to retire that meaning of ANY in favor of the OpenFlow 1.1 meaning. - Patch ports no longer require kernel support, so they now work with FreeBSD and the kernel module built into Linux 3.3 and later. - New "sample" action. v1.9.0 - 26 Feb 2013 ------------------------ - Datapath: - Support for ipv6 set action. - SKB mark matching and setting. - support for Linux kernels up to 3.8 - FreeBSD is now a supported platform, thanks to code contributions from Gaetano Catalli, Ed Maste, and Giuseppe Lettieri. - ovs-bugtool: New --ovs option to report only OVS related information. - New %t and %T log escapes to identify the subprogram within a cooperating group of processes or threads that emitted a log message. The default log patterns now include this information. - OpenFlow: - Allow bitwise masking for SHA and THA fields in ARP, SLL and TLL fields in IPv6 neighbor discovery messages, and IPv6 flow label. - Adds support for writing to the metadata field for a flow. - Tunneling: - The tunneling code no longer assumes input and output keys are symmetric. If they are not, PMTUD needs to be disabled for tunneling to work. Note this only applies to flow-based keys. - New support for a nonstandard form of GRE that supports a 64-bit key. - Tunnel Path MTU Discovery default value was set to 'disabled'. This feature is deprecated and will be removed soon. - Tunnel header caching removed. - ovs-ofctl: - Commands and actions that accept port numbers now also accept keywords that represent those ports (such as LOCAL, NONE, and ALL). This is also the recommended way to specify these ports, for compatibility with OpenFlow 1.1 and later (which use the OpenFlow 1.0 numbers for these ports for different purposes). - ovs-dpctl: - Support requesting the port number with the "port_no" option in the "add-if" command. - ovs-pki: The "online PKI" features have been removed, along with the ovs-pki-cgi program that facilitated it, because of some alarmist insecurity claims. We do not believe that these claims are true, but because we do not know of any users for this feature it seems better on balance to remove it. (The ovs-pki-cgi program was not included in distribution packaging.) - ovsdb-server now enforces the immutability of immutable columns. This was not enforced in earlier versions due to an oversight. - The following features are now deprecated. They will be removed no earlier than February 2013. Please email dev@openvswitch.org with concerns. - Bridge compatibility. - Stable bond mode. - The autopath action. - Interface type "null". - Numeric values for reserved ports (see "ovs-ofctl" note above). - Tunnel Path MTU Discovery. - CAPWAP tunnel support. - The data in the RARP packets can now be matched in the same way as the data in ARP packets. v1.8.0 - 26 Feb 2013 ------------------------ *** Internal only release *** - New FAQ. Please send updates and additions! - Authors of controllers, please read the new section titled "Action Reproduction" in DESIGN, which describes an Open vSwitch change in behavior in corner cases that may affect some controllers. - ovs-l3ping: - A new test utility that can create L3 tunnel between two Open vSwitches and detect connectivity issues. - ovs-ofctl: - New --sort and --rsort options for "dump-flows" command. - "mod-port" command can now control all OpenFlow config flags. - OpenFlow: - Allow general bitwise masking for IPv4 and IPv6 addresses in IPv4, IPv6, and ARP packets. (Previously, only CIDR masks were allowed.) - Allow support for arbitrary Ethernet masks. (Previously, only the multicast bit in the destination address could be individually masked.) - New field OXM_OF_METADATA, to align with OpenFlow 1.1. - The OFPST_QUEUE request now reports an error if a specified port or queue does not exist, or for requests for a specific queue on all ports, if the specified queue does not exist on any port. (Previous versions generally reported an empty set of results.) - New "flow monitor" feature to allow controllers to be notified of flow table changes as they happen. - Additional protocols are not mirrored and dropped when forward-bpdu is false. For a full list, see the ovs-vswitchd.conf.db man page. - Open vSwitch now sends RARP packets in situations where it previously sent a custom protocol, making it consistent with behavior of QEMU and VMware. - All Open vSwitch programs and log files now show timestamps in UTC, instead the local timezone, by default. v1.7.0 - 30 Jul 2012 ------------------------ - kernel modules are renamed. openvswitch_mod.ko is now openvswitch.ko and brcompat_mod.ko is now brcompat.ko. - Increased the number of NXM registers to 8. - Added ability to configure DSCP setting for manager and controller connections. By default, these connections have a DSCP value of Internetwork Control (0xc0). - Added the granular link health statistics, 'cfm_health', to an interface. - OpenFlow: - Added support to mask nd_target for ICMPv6 neighbor discovery flows. - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC) multipart messages. - ovs-ofctl: - Added the "dump-ports-desc" command to retrieve port information using the new port description multipart messages. - ovs-test: - Added support for spawning ovs-test server from the client. - Now ovs-test is able to automatically create test bridges and ports. - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows. - Tripled flow setup performance. - The "coverage/log" command previously available through ovs-appctl has been replaced by "coverage/show". The new command replies with coverage counter values, instead of logging them. v1.6.1 - 25 Jun 2012 ------------------------ - Allow OFPP_CONTROLLER as the in_port for packet-out messages. v1.6.0 - 24 Feb 2012 ------------------------ *** Internal only release *** - bonding - LACP bonds no longer fall back to balance-slb when negotiations fail. Instead they drop traffic. - The default bond_mode changed from SLB to active-backup, to protect unsuspecting users from the significant risks of SLB bonds (which are documented in vswitchd/INTERNALS). - Load balancing can be disabled by setting the bond-rebalance-interval to zero. - OpenFlow: - Added support for bitwise matching on TCP and UDP ports. See ovs-ofctl(8) for more information. - NXM flow dumps now include times elapsed toward idle and hard timeouts. - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows controllers more precise control over which OpenFlow messages they receive asynchronously. - New "fin_timeout" action. - Added "fin_timeout" support to "learn" action. - New Nicira action NXAST_CONTROLLER that offers additional features over output to OFPP_CONTROLLER. - When QoS settings for an interface do not configure a default queue (queue 0), Open vSwitch now uses a default configuration for that queue, instead of dropping all packets as in previous versions. - Logging: - Logging to console and file will have UTC timestamp as a default for all the daemons. An example of the default format is 2012-01-27T16:35:17Z. ovs-appctl can be used to change the default format as before. - The syntax of commands and options to set log levels was simplified, to make it easier to remember. - New support for limiting the number of flows in an OpenFlow flow table, with configurable policy for evicting flows upon overflow. See the Flow_Table table in ovs-vswitch.conf.db(5) for more information. - New "enable-async-messages" column in the Controller table. If set to false, OpenFlow connections to the controller will initially have all asynchronous messages disabled, overriding normal OpenFlow behavior. - ofproto-provider interface: - "struct rule" has a new member "used" that ofproto implementations should maintain by updating with ofproto_rule_update_used(). - ovsdb-client: - The new option --timestamp causes the "monitor" command to print a timestamp with every update. - CFM module CCM broadcasts can now be tagged with an 802.1p priority. v1.5.0 - 01 Jun 2012 ------------------------ - OpenFlow: - Added support for querying, modifying, and deleting flows based on flow cookie when using NXM. - Added new NXM_PACKET_IN format. - Added new NXAST_DEC_TTL action. - ovs-ofctl: - Added daemonization support to the monitor and snoop commands. - ovs-vsctl: - The "find" command supports new set relational operators {=}, {!=}, {<}, {>}, {<=}, and {>=}. - ovsdb-tool now uses the typical database and schema installation directories as defaults. - The default MAC learning timeout has been increased from 60 seconds to 300 seconds. The MAC learning timeout is now configurable. v1.4.0 - 30 Jan 2012 ------------------------ - Compatible with Open vSwitch kernel module included in Linux 3.3. - New "VLAN splinters" feature to work around buggy device drivers in old Linux versions. (This feature is deprecated. When broken device drivers are no longer in widespread use, we will delete this feature.) See ovs-vswitchd.conf.db(5) for more information. - OpenFlow: - Added ability to match on IPv6 flow label through NXM. - Added ability to match on ECN bits in IPv4 and IPv6 through NXM. - Added ability to match on TTL in IPv4 and IPv6 through NXM. - Added ability to modify ECN bits in IPv4. - Added ability to modify TTL in IPv4. - ovs-vswitchd: - Don't require the "normal" action to use mirrors. Traffic will now be properly mirrored for any flows, regardless of their actions. - Track packet and byte statistics sent on mirrors. - The sFlow implementation can now usually infer the correct agent device instead of having to be told explicitly. - ovs-appctl: - New "fdb/flush" command to flush bridge's MAC learning table. - ovs-test: - A new distributed testing tool that allows one to diagnose performance and connectivity issues. This tool currently is not included in RH or Xen packages. - RHEL packaging now supports integration with Red Hat network scripts. - bonding: - Post 1.4.*, OVS will be changing the default bond mode from balance-slb to active-backup. SLB bonds carry significant risks with them (documented vswitchd/INTERNALS) which we want to prevent unsuspecting users from running into. Users are advised to update any scripts or configuration which may be negatively impacted by explicitly setting the bond mode which they want to use. v1.3.0 - 09 Dec 2011 ------------------------ - OpenFlow: - Added an OpenFlow extension which allows the "output" action to accept NXM fields. - Added an OpenFlow extension for flexible learning. - Bumped number of NXM registers from four to five. - ovs-appctl: - New "version" command to determine version of running daemon. - If no argument is provided for "cfm/show", displays detailed information about all interfaces with CFM enabled. - If no argument is provided for "lacp/show", displays detailed information about all ports with LACP enabled. - ovs-dpctl: - New "set-if" command to modify a datapath port's configuration. - ovs-vswitchd: - The software switch now supports 255 OpenFlow tables, instead of just one. By default, only table 0 is consulted, but the new NXAST_RESUBMIT_TABLE action can look up in additional tables. Tables 128 and above are reserved for use by the switch itself; please use only tables 0 through 127. - Add support for 802.1D spanning tree (STP). - Fragment handling extensions: - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4 fields are made available for matching in fragments with offset 0. - New NXM_NX_IP_FRAG match field for matching IP fragments (usable via "ip_frag" in ovs-ofctl). - New ovs-ofctl "get-frags" and "set-frags" commands to get and set fragment handling policy. - CAPWAP tunneling now supports an extension to transport a 64-bit key. By default it remains compatible with the old version and other standards-based implementations. - Flow setups are now processed in a round-robin manner across ports to prevent any single client from monopolizing the CPU and conducting a denial of service attack. - Added support for native VLAN tagging. A new "vlan_mode" parameter can be set for "port". Possible values: "access", "trunk", "native-tagged" and "native-untagged". - test-openflowd has been removed. Please use ovs-vswitchd instead. v1.2.0 - 03 Aug 2011 ------------------------ - New "ofproto" abstraction layer to ease porting to hardware switching ASICs. - Packaging for Red Hat Enterprise Linux 5.6 and 6.0. - Datapath support for Linux kernels up to 3.0. - OpenFlow: - New "bundle" and "bundle_load" action extensions. - Database: - Implement table unique constraints. - Support cooperative locking between callers. - ovs-dpctl: - New "-s" option for "show" command prints packet and byte counters for each port. - ovs-ofctl: - New "--readd" option for "replace-flows". - ovs-vsctl: - New "show" command to print an overview of configuration. - New "comment" command to add remark that explains intentions. - ovs-brcompatd has been rewritten to fix long-standing bugs. - ovs-openflowd has been renamed test-openflowd and moved into the tests directory. Its presence confused too many users. Please use ovs-vswitchd instead. - New ovs-benchmark utility to test flow setup performance. - A new log level "off" has been added. Configuring a log facility "off" prevents any messages from being logged to it. Previously, "emer" was effectively "off" because no messages were ever logged at level "emer". Now, errors that cause a process to exit are logged at "emer" level. - "configure" option --with-l26 has been renamed --with-linux, and --with-l26-source has been renamed --with-linux-source. The old names will be removed after the next release, so please update your scripts. - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and datapath/linux-2.6/compat-2.6 directories. - Feature removals: - Dropped support for "tun_id_from_cookie" OpenFlow extension. Please use the extensible match extensions instead. - Removed the Maintenance_Point and Monitor tables in an effort to simplify 802.1ag configuration. - Performance and scalability improvements - Bug fixes v1.1.0 - 05 Apr 2011 ------------------------ - Ability to define policies over IPv6 - LACP - 802.1ag CCM - Support for extensible match extensions to OpenFlow - QoS: - Support for HFSC qdisc. - Queue used by in-band control can now be configured. - Kernel: - Kernel<->userspace interface has been reworked and should be close to a stable ABI now. - "Port group" concept has been dropped. - GRE over IPSEC tunnels - Bonding: - New active backup bonding mode. - New L4 hashing support when LACP is enabled. - Source MAC hash now includes VLAN field also. - miimon support. - Greatly improved handling of large flow tables - ovs-dpctl: - "show" command now prints full vport configuration. - "dump-groups" command removed since kernel support for port groups was dropped. - ovs-vsctl: - New commands for working with the new Managers table. - "list" command enhanced with new formatting options and --columns option. - "get" command now accepts new --id option. - New "find" command. - ovs-ofctl: - New "queue-stats" command for printing queue stats. - New commands "replace-flows" and "diff-flows". - Commands to add and remove flows can now read from files. - New --flow-format option to enable or disable NXM. - New --more option to increase OpenFlow message verbosity. - Removed "tun-cookie" command, which is no longer useful. - ovs-controller enhancements for testing various features. - New ovs-vlan-test command for testing for Linux kernel driver VLAN bugs. New ovs-vlan-bug-workaround command for enabling and disabling a workaround for these driver bugs. - OpenFlow support: - "Resubmit" actions now update flow statistics. - New "register" extension for use in matching and actions, via NXM. - New "multipath" experimental action extension. - New support for matching multicast Ethernet frames, via NXM. - New extension for OpenFlow vendor error codes. - New extension to set the QoS output queue without actually sending to an output port. - Open vSwitch now reports a single flow table, instead of separate hash and wildcard tables. This better models the current implementation. - New experimental "note" action. - New "ofproto/trace" ovs-appctl command and associated utilities to ease debugging complex flow tables. - Database: - Schema documentation now includes an entity-relationship diagram. - The database is now garbage collected. In most tables, unreferenced rows will be deleted automatically. - Many tables now include statistics updated periodically by ovs-vswitchd or ovsdb-server. - Every table now has an "external-ids" column for use by OVS integrators. - There is no default controller anymore. Each bridge must have its controller individually specified. - The "fail-mode" is now a property of a Bridge instead of a Controller. - New versioning and checksum features. - New Managers table and manager_options column in Open_vSwitch table for specifying managers. The old "managers" column in the Open_vSwitch table has been removed. - Many "name" columns are now immutable. - Feature removals: - Dropped support for XenServer pre-5.6.100. - Dropped support for Linux pre-2.6.18. - Dropped controller discovery support. - Dropped "ovs-ofctl status" and the OpenFlow extension that it used. Statistics reporting in the database is a rough equivalent. - Dropped the "corekeeper" package (now separate, at http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper). - Performance and scalability improvements - Bug fixes v1.1.0pre2 - 13 Sep 2010 ------------------------ - Bug fixes v1.1.0pre1 - 31 Aug 2010 ------------------------ - OpenFlow 1.0 slicing (QoS) functionality - Python bindings for configuration database (no write support) - Performance and scalability improvements - Bug fixes v1.0.1 - 31 May 2010 -------------------- - New "patch" interface type - Bug fixes v1.0.0 - 15 May 2010 -------------------- - Configuration database with remote management - OpenFlow 1.0 - GRE tunneling - Support for XenServer 5.5 and 5.6 - Performance and scalability improvements - Bug fixes v0.99.2 - 18 Feb 2010 --------------------- - Bug fixes v0.99.1 - 25 Jan 2010 --------------------- - Add support for sFlow(R) - Make headers compatible with C++ - Bug fixes v0.99.0 - 14 Jan 2010 --------------------- - User-space forwarding engine - Bug fixes v0.90.7 - 29 Nov 2009 --------------------- - Add support for NetFlow active timeouts - Bug fixes v0.90.6 - 6 Oct 2009 -------------------- - Bug fixes v0.90.5 - 21 Sep 2009 --------------------- - Generalize in-band control to more diverse network setups - Bug fixes